I-CERAMIC LINED CAMPONES NE-BEND

Inkcazelo emfutshane:

I-ceramic-lined composite bend luhlobo olukhethekileyo lokugoba olunomgca we-ceramic material efakwe ngaphakathi kwayo.

Iinkcukacha zeMveliso

Iithegi zeMveliso

I-CERAMIC LINED CAMPONES NE-BEND

A i-ceramic-lined composite bendluhlobo olukhethekileyo lokugoba olunomaleko wemathiriyeli ye-ceramic efakwe ngaphakathi kwayo.Olu yilo lokugoba lunokusebenzisa ngokupheleleyo iingenelo zazo zombini iintsimbi kunye neeseramikhi, ziqinisekisa ukomelela kunye nokusebenza kwesinyithi kunye nobushushu obuphezulu, ukunganxibi, kunye neepropathi zeseramikhi ezikwaziyo ukubola.

Nzima & IQinakele ;Igudile & Inert ;Imelana ne-High-Abrasion kunye ne-Corrosion yokunxiba i-linings ye-ceramic

Kuwo nawaphi na amashishini enkqubo, ngakumbi intsimbi kunye nesamente, ukubola kunye nokukrala kukhokelela ekunciphiseni ixesha elibalulekileyo kwisityalo.Ngaphaya koko, ubomi obuluncedo besixhobo ngokwaso bunokonakala ngenxa yokurhawuka okuphezulu kwezinto ezisetyenziswayo.Ke ngoko, 'indlela yokunxiba' ikhokelela ekuvalweni, ukutshintshwa, njl.njl., okunexabiso elikhulu, okukhokelela kwilahleko efikelela kwizigidi zeerandi.Ukuchasana nokugqoka, ii-ceramic lined bends, iipayipi ezichanekileyo, njl., zifanelekile.

Ngokusekwe kwiminyaka yokuziqhelanisa, i-Kingcera yazisa itekhnoloji ephucukileyo evela phesheya, yatshintsha indlela yokulungisa i-ceramic ukusuka kwindlela elula yokuncamathelisa ukuya kwi-high-temperature resistant inorganic adhesive bonding, i-arching kunye ne-stud welding kathathu, kwaye yandisa ubushushu bokusebenzisa ukuya kwi-750 ℃.Ukusombulula ngokupheleleyo ingxaki ye-ceramic ewa kwiqondo lokushisa eliphezulu, iphakamisa kakhulu ukuthembeka, kwaye ngokubanzi ukwandisa ubomi besixhobo ngamaxesha angama-10-20.

IIMBONAKALO

Ukuchasana okuphezulu kuzo zonke iintlobo zeekhemikhali

Ukuxhathisa okuphezulu kwi-sliding abrasion

Ukungakwazi ukumanzisa kunye nomphezulu ogudileyo kubangela ukuhamba lula kwemathiriyeli

Iyakwazi ukumelana namaqondo obushushu ukuya kuma 200°C

I-ID encinci ye-100 mm nayo inokuveliswa

Iinkcukacha zobuGcisa

• ICeramic Lined Bends isetyenziselwa ukuhambisa imathiriyeli ngesantya esiphezulu.

• I-Ceramic lining isetyenziselwa usetyenziso lwerediyasi emfutshane ye-Bend.

• Ubukhulu bethayile buqala kwi-6 mm ukuya kwi-50 mm.

• Iisayizi zetyhubhu (iisilinda) zisuka kwi-40 ukuya kwi-150 mm ID.

• Uhlobo lweeThayile: Ithafa / iTapered, iPastable / Weldeable, Pressed/Cast.

IiNkcazo zeMathiriyeli

Udidi	HC92	HC95	HCT95	HC99	I-HC-ZTA
Al₂O₃	≥92%	≥95%	≥ 95%	≥ 99%	≥75%
ZrO2	/	/	/	/	≥21%
Ukuxinana (g/cm³）	ngaphezulu kwe-3.60	3.65g	3.70	3.83	4.10
HV 20	≥950	≥1000	≥1100	≥1200	≥1350
Ukuqina Kwamatye HRA	≥82	≥85	≥88	≥90	≥90
Ukugoba Amandla eMPa	≥220	≥250	≥300	≥330	≥400
Amandla oxinzelelo lweMPa	≥1050	≥1300	≥1600	≥1800	≥2000
Ukuqina Kokwaphuka (Kic MPam 1/2)	≥3.7	≥3.8	≥4.0	≥4.2	≥4.5
Nxiba umthamo (cm³⁾	≤0.25	≤0.20	≤0.15	≤0.10	≤0.05